STOP. READ ENTIRE LABEL BEFORE USE.
For outdoor use only. Do not apply this product if bees or other pollinators are foraging in the treatment area
- SHAKE WELL before using.
- Connect a garden hose to the Ready Spray nozzle. Make sure the needle of the adjustable dial on the nozzle is in the "OFF" position.
- Turn on water at faucet. Extend hose to the farthest area to be treated and work back toward the faucet so you don't come in contact with the treated area.
- To begin spraying, point nozzle toward treatment site. Turn the adjustable dial until the needle is in the "FAN" position for application. Water will automatically mix with the product.
- Apply liberally to plants and their perimeter during a dry period. Walk at a steady, brisk pace while spraying, using an even sweeping motion, slightly overlapping treated areas.
- To stop spraying, quickly turn the adjustable dial until the needle is in the "OFF" position. Turn water off at faucet. To relieve pressure before removing nozzle from hose, turn the dial back to the "FAN" position until the water stops spraying.
- To store unused product, make sure the needle on the dial is in the "OFF" position. Place in cool area away from heat, sunlight or open flame.
Repeat process one week later and then approximately once per month thereafter. In areas where feeding pressure from deer and rabbits is intense, spray Liquid Fence® Deer & Rabbit Repellent Concentrate2 once a week for three weeks and then
approximately once per month thereafter.
Note: When using this product, you may notice an odor. Once it dries, the odor will not be noticeable to humans but will still be very noticeable to animals.